BDS Suspension Fox 2.5 Coil-Over Shock Absorbers

Fox 2.5 Remote Reservoir Coil-Over Shock Absorbers are a collaboration design by BDS and Fox for unmatched performance. BDS continues to uphold our reputation of offering only high ends parts with these new coil-over shocks, a collaboration design by both BDS and Fox Racing. These shocks are built on the foundation of the Fox Factory Series 2.5 Remote Coil-over and have been designed to work with BDS lift systems. The coil-overs come preloaded with Eibach coil springs and are adjusted to achieve the proper ride height right out of the box. These coil-over kits come boxed as a pair with remote reservoir mounting brackets and all of the necessary hardware. Although designed specifically for BDS Suspension Systems, these may work with other brand lifts, but fitment cannot be guaranteed and may require additional suspension modification for a proper setup.

Vehicle Accessories carries a complete line of BDS Suspension products. Stop by any of our locations in Flint, Bay City, Clarkston and Lansing or call us Toll Free at 1-866-820-2119 for pricing and availability. If you don't see a product that you were looking for, please give us a call so that we may assist you.

Dual Speed Compression (DSC) Adjuster (Optional Upgrade)

• All the Fox Racing Coil-Over Advantages Plus:
• Provides added control and comfort for on-road use
• More aggressive damping for use off-road
• DSC adjuster allows for precise suspension tuning
• No tools and no mess
• DSC increases both low and high-speed compression levels up to 25%

Warranty BDS Suspension's No-Fine-Print Warranty
This unique warranty proves our commitment to the quality and reliability of every product we make.The No Fine Print warranty does not include shock and stabilizer cylinders.

No Fine Print Warranty
If you are the original purchaser of any BDS product and it breaks, we will give you a new part. Period.

Shock and Stabilizer Cylinders Limited Lifetime Warranty
BDS Suspension Co. warrants to the original retail purchaser that its shock and stabilizer cylinders are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product and mounting bushings. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust, worn or deformed bushings. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.

Shock oil seals are subject to wear over time, and use. Therefore are not covered under warranty. However leaking shock seals less than one year from date of purchase, free from contamination, damage, or abnormal seal wear due to misuse can be considered for Warranty.

BDS Suspension's obligation under all warranties is limited to the repair or replacement, at BDS's option, of the defective material. Any cost of removal, installation or reinstallation, freight charges, incidental or consequential damages are expressly excluded from these warranties.


All BDS Suspension systems are FMVSS No. 126 Compliant. When you see this symbol you will know with confidence this application has been tested and successfully passed the Federal Motor Vehicle Safety Standard No. 126 test. This highly specialized test was performed to show the installation of this particular BDS suspension system, with a specific tire and wheel package would not compromise the performance and effectiveness of the vehicle's Electronic Stability Control (ESC) system.