ReadyLift products will enhance your vehicle's appearance and ground clearance, which will allow use of plus-size wheel and tire combinations (including 22"-24" rims) without any rubbing. ReadyLift is the only company that forges its torsion keys for ultimate strength and dependability, which is why ReadyLift can offer a Lifetime Warranty on all of its products. From light-duty to heavy-duty Trucks or SUV’s, ReadyLift is the SMART way to level your vehicle ride height.
 |
 |
 |
 |
66-1000
The Torsion key center is designed to grab the "flat" of the torsion bar, not the edges, greatly increasing the holding strength. Includes mounting tool adapter.
- Max Lift: 2.0"
- Max Tire Dia: 35"
|
66-3050
A heavy-duty shock extension keeps the correct piston travel on the stock shock. Forged Torsion Key are 25% stronger than the OEM cast Part.
- Max Lift: 2.5"
- Max Tire Dia: 33"
|
66-3000
Custom torsion key kit includes shorter adjusting bolts. This will prevent over-rotating the torsion key. The kit may be dialed up with the stock adjusting bolts, which will affect ride quality.
- Max Lift: 2.5"
- Max Tire Dia: 33"
|
 |
 |
 |
 |
66-1020
ReadyLift has the only kit with a custom A-arm bump stop for the 05-07 Ram 1500 4wd. This prevents suspension damage during extreme travel. NO CUTTING NO SPRING COMPRESSOR
- Max Lift: 2.5"
- Max Tire Dia: 35"
|
66-5055
This part installs directly on top of the strut assembly without the use of a spring compressor. Also lifts the FJ Cruiser and Pre-Runner. NO CUTTING NO SPRING COMPRESSOR
- Max Lift: 2.25"
- Max Tire Dia: 32.5"
|
66-3080
Fits the "New Body" 2007 GM 6-Lug. Made in the USA! Machined from solid Billet Aluminum 1.5" Lift. NO CUTTING NO SPRING COMPRESSOR
- Max Lift: 1.5"
- Max Tire Dia: 32.5"
|
 |
 |
 |
 |
66-3025
ReadyLift is the only company that uses steel fused with urethane. The steel spring spacer will not deteriorate or require realignment over time while the urethane keeps the ride smooth and quiet. Patent Applied. NO CUTTING
- Max Lift: 2.0"
- Max Tire Dia: 32.5"
|
66-2090
Polyurethane donuts will keep your factory ride smooth and quiet. The kit allows for use of up to 35" tire. NO CUTTING NO SPRING COMPRESSOR
- Max Lift: 2.5"
- Max Tire Dia: 37"
|
66-1090
This Spring Spacer uses powder-coated 7mm steel with metric 10.9 rated mounting studs. easy to install coil spacer uses NO CUTTING NO SPRING COMPRESSOR.
- Max Lift: 2.0"
- Max Tire Dia: 35"
|
READYLIFT kits allow for the use of tires with heights ranging from 32" to 37" inches depending on application. We state it is the responsibility of the installer to verify correct and safe fitments. We do not assume responsibility for any errors or misapplication contained within this guide. We recommend custom wheels no wider than 8.5" - 9.0" with a minimum of 4.5" of backspacing on most applications. Using wheels wider than 8.5" may require a larger backspacing or a reduced tire height to reduce the chance of tire to fender clearance problems on some applications. In order to install the maximum tire size it may require retaining the factory back spacing and wheel width. Some applications may require some slight inside front fender well shrouding modifications. |
