Pilot Brake Controller for 1 to 3 Axle Trailers
Time Based Controls generated an output signal that increases over a period of time (Ramp Cycle). The time-based controls apply braking power at a fixed rate that is not proportional to the pressure applied to the brake pedal.
The DrawTite Pilot brake controller has just made owning and operation a digital brake control easier than ever. The dark, smoke lens is ideal for direct light applications, creating optimum visibility to read the large, two-digit display.
Because of the flexible mounting options, you are able to mount the Pilot Brake Controller in any directions. Our microprocessor allows you the ability to read the display even when the Pilot is mounted upside down. The Pilot's digital display shows voltage output to the brakes with additional protection against short circuit or loss of ground. Capable for handling up to 3 axle trailers.
- Large easy to read dual digital display shows:
- Properly wired control
- Voltage output to brakes (vs. a percentage output)
- Connection to trailer
- Dark smoke lens ideal for direct light applications; performs better than red lens
- Microprocessor allows control to be mounted upside down and still have a readable display
- Protection against short circuit and loss of ground
- Standard mounting bracket and pivot mount included
- For use on any 12 volt negative ground system
- Lifetime Limited Warranty
Note: Not recommended for us with BMW X5 Sport Utility Vehicles
