For cars and minivans towing small trailers or accessories such as bike racks.
1-1/4" square receiver on all new models.
Class I - up to 2,000 lbs. G.T.W. Capacity (200 lbs. T.W.)
Round tube designs available for all new applications where hitch can not be hidden behind bumper.
Comes with ball mount, pin, clip and attractive cover.
Class II Trailer Hitches:
For cars and minivans towing small trailers or accessories such as bike racks.
1-1/4" square receiver on all new models.
Class II - up to 3,500 lbs. G.T.W. Capacity (300 lbs. T.W.)
Round tube designs available for all new applications where hitch can not be hidden behind bumper.
Comes with ball mount, pin, clip and attractive cover.
Class III / IV Trailer Hitches:
For SUV's,
vans and pick-ups carrying trailers or accessories such as cargo carriers
or bike racks
2" square receiver opening.
Up to 6,000 lbs. G.T.W. Capacity (600 lbs T.W.)
Weight distribution may be added to increase capacity to 10,000lbs.
Stylish round tube designs for instances where hitch can not be hidden behind bumper.
Electrical bracket included on same models
Ballmounts of various lengths drops and rises available (purchased separately)
Class V Trailer Hitches:
Our toughest pick-up hitch
for heavy duty towing.
2.5" receiver opening.
Up to 10,000 lbs. G.T.W. Capacity (1,000 lbs. T.W.)
Weight distrubution may be added to increase tow capacity up to 14,000 lbs.
Square tube
Most come with electrical bracket that will accept OEM style 7 way plugs.
Many accessories available including a full line of pintle hooks, combos and adapters.
These notes to you what you may need to do to your vehicle when installing your selected hitch. When you perform the lookup for your vehicle, you might see some numbers or symbols at the end of the listed part number. These numbers or symbols allow you to look up extra information about the hitch you would like to purchase.
Look below to find out what your codes mean.
! -- Hitch rated at 2,500 lbs. GTW, 250 lbs. TW.
# -- Titan hitches require use of a 2-1/2" shank Titan ball mount.
* -- Requires 4 Flat Wiring.
@ -- Ultra Frame ball mount must be used to achieve maximum weight carrying rating.
† -- Available while supply lasts.
A -- 2 wire system. No Converter required, but a ModuLite® can be used.
AA -- Requires temporary removal of bumper during installation.
AB -- Requires four (4) 3/8" spacer blocks (#01077-011) for installation. (Sold separately)
AC -- Hitch rated at 1,000 lbs. GTW, 100 lbs. TW.
AD -- Hitch rated at 1,500 lbs. GTW, 150 lbs. TW.
AE -- Requires temporary removal of muffler during installation.
AF -- Hitch is ONLY rated for Weight Carrying at 3,500 lbs. GTW, 350 lbs. TW and DO NOT use w/Weight Distribution Spring Bars for this Specific Vehicle. Except for long bed pickups.
AG -- Drawbar Kit & Accessory Adapter sold separately.
AI -- Additional installation time required.
AL -- Additional installation time required for vehicles equipped with load leveling compressor.
AM -- Not recommended on Trofeó models prior to 1989. 1989 units require minor fascia trim and exhaust repositioning.
AO -- Will not fit vehicles with twin tailpipes.
AP -- 2 wire system w/Pulse Width Modulation (PWM). Upgraded ModuLite® required.
CH -- T-One is equipped with circuit protected ModuLite® module.
CK -- Drawbar installs though fascia on SC models. Obtain customer approval.
CM -- OEM Style Attachments/Requires Factory Bumper For Hitch Installation.
CN -- Requires OEM factory bumper for hitch installation.
CO -- Will not fit 8 ft. 2500/3500 Series with heavy-duty suspension or four door Crew Cab.
CP -- Fits All Models without Factory Installed Receiver.
CQ -- Will not fit with heavy duty suspension.
CR -- Fits with mini spare tire stowed under vehicle. Will not fit with full size spare.
CS -- Will fit with full-size spare tire stowed under vehicle.
CT -- Will not fit long bed models after 1999.
CU -- Includes models with large fuel tank and skid shield.
CV -- Will not fit short wheel base with dual exhaust.
D -- See auto dealer for trailer tow wiring kit.
DA -- Will not fit with tube style bumper.
DB -- Will not fit 6 ft. bed pickups.
DG -- 1971-77 (Standard) Van: Will not fit with optional large gas tank. 1974-77 (Maxi) Van: Includes models with optional large gas tank.
DH -- Cannot be installed on 1987-97 vehicles with factory step bumpers unless step bumper and its mounting brackets are permanently removed and standard factory bumper is installed.
DI -- All models with metal bumpers.
DR -- Additional installation time required for vehicles equipped with skid shield.
DS -- Use DT #75151/HH #87533/RS #33072 On 1500 Models Built After 11/1/02. Use DT #75135/HH #87532/RS #37084 On 1500 Models Built Before 11/1/02.
DU -- Fascia removal required.
DV -- Will not fit short wheel base models.
DX -- Requires six 3/8" spacer blocks (#01077-011) and six 1/2-13 x 2-1/4 GR5 carriage bolts (#01266-009) which are not provided (Sold separately).
DY -- Use On 1500 Models Built After 11/1/02.
E -- ModuLite® required.
EB -- Factory electrical bracket will NOT fit with this hitch. Must use aftermarket electrical box or bracket.
EE -- Fascia trimming required on '91 and earlier GLS models. Not recommended on '92 GLS models due to excessive fascia trimming.
EF -- Fits all models with standard bumpers.
EG -- Relocation of spare tire bracket is not required. NOTE: 19mm open end style wrench must be purchased to allow removal of spare tire after hitch installation.
EK -- Extended Cab only.
EO -- Requires longer ball mount.
EP -- Fascia trimming required.
F -- ModuLite® recommended.
FB -- Will not fit vehicles fitted with optional 31" tires stowed under vehicle.
FE -- Fascia trimming required. Allow additional installation time.
FM -- On vehicles equipped with load leveling device, air pump mounting modification required.
FN -- Will not fit vehicles equipped with air suspension.
FP -- Spare tire repositioning and/or modification of spare tire carrier may be required.
FR -- Will not fit Extended Cab w/stationary side window.
FS -- Includes 2 & 4 WD models with heavy duty suspension.
FT -- Models with 16" spare tire must be relocated.
FV -- 2003 Models w/Build date after 11/1/02.
FW -- 2003 Models w/Build date before 11/1/02.
FX -- Fits vehicles with spacer between E/A unit and frame built before Jan.'93 and after Mar.'93.
FZ -- Fits vehicles with E/A unit only. Not vehicles with 1/2" circle stamping in place of E/A unit.
G -- Low-side switching system.
GC -- T-One is equipped with ModuLite® Lite module.
GF -- Drilling required only on vehicles with load leveling compressor.
GH -- Will not fit models with 34" wide frames.
GK -- Vehicles with step bumper require optional drawbar #36063/64.
GO -- Requires hitch with packaging date code 2/15/94 or later.
GP -- Hitch crosstube concealed behind bumper.
GU -- Will not fit vehicles with factory or aftermarket lower Fascia/Rollpan or Tube Bumper.
GW -- Spare tire cannot be stowed under vehicle on short wheelbase models equipped with 15" tires or full size spare.
GX -- Requires fabrication of "L" bracket to reposition exhaust on '95 and later 6 ft. box models.
H -- 3 wire system with OEM standard 2 wire harness.
HA -- External dress panel beneath 95-97 and 03-05 vehicles must be removed for hitch installation.
HB -- Slight fascia deformation may occur on some models.
HC -- Will not fit with mini or full size tire stowed under vehicle.
HD -- Will not fit 6 ft. bed pickups except 6 ft. Super Cab.
HF -- For Vehicles equipped with 7-Way Tow Package, converts to 4-Flat.
HG -- T-One incorporates taillight converter.
HJ -- Per Dodge owner's manual: If trailer is equipped with more than standard lighting (1 taillight per side), use of ModuLite® or dealer supplied harness is required.
HK -- Under vehicle spare tire stowage may be retained with installation of an aftermarket spare tire repositioner. Cutting of rollpan in license plate area required for receiver tube access. Does not fit with bumper.
HM -- Hitch crosstube is visible beneath bumper.
HP -- Requires four (4) 7/16" x 1" x 2" spacer blocks (#01080-012) for installation. (Sold separately)
HQ -- Universal bike rack required.
HR -- Requires drilling of heat shields on V6 models.
HX -- Minor exhaust modification may be required.
HY -- Ultra Frame ball mount DT #4283/HH #80125 cannot be used in rise position on vehicles with step bumpers.
I -- Hitch is positioned further rearward to accommodate spare tire.
J -- Under vehicle spare tire stowage is retained.
JF -- Will not fit with 16" spare tire.
JL -- Installation requires OEM bumper and brackets.
JM -- Some early production 1994 models may require #118348.
JP -- J-Pin Ready Receiver.
JR -- Exhaust must be temporarily lowered for installation.
JS -- Will not fit 1999-2004 Cobra SVT.
JT -- 2WD models only.
JU -- License plate relocation required to install hitch, see 5443. (Sold separately)
JV -- Rubber air deflector/fascia must be removed or trimmed to install hitch.
JW -- 4WD models only.
JX -- Requires factory tow hooks for installation on 2WD models.
JY -- Extensive fascia cutting required on models w/fog lamp option.
JZ -- Requires factory stabilizer (anti-roll) bar for hitch installation.
K -- Adapter kit (#1685) required with DT #41504/HH #87480/RS #37081 & RS #44143 for 1980 and later F-Series pickups.
KA -- Gasoline engine models only.
KB -- Diesel engine models only.
KC -- Does not fit 2500/3500 2WD (C-Series) models w/8 lug wheels.
KH -- Minor heat shield modification may be required.
KI -- Optional OEM Fog Lights must be removed for receiver installation.
KK -- When installing on a vehicle originally equipped with an OEM hitch, OEM bumper brackets must be purchased and installed prior to new hitch installation.
KL -- Hitch is designed to attach beneath the OEM hitch.
L -- Exhaust repositioning required.
LD -- Vehicle has LED taillamps.
LS -- T-One incorporates low-side switching taillight converter. Additional installation time required.
LT -- Requires removal of factory hitch if equipped.
M -- Will fit with heavy-duty suspension.
MB -- Will not fit models equipped with air suspension package.
MX -- Multiplexed Wiring System.
N -- DO NOT cut or splice vehicle wiring. Only use approved T-One or see auto dealer for trailer tow wiring kit.
O -- Will not fit vehicles equipped with dual exhaust exiting below the bumper.
Ø -- Uses all existing holes, no drilling required.
OE -- Vehicles Must Have O.E.M. Trailer Hitch Installed.
P -- For 124" wheelbase and E350 models, adapter kit (2626) is required. (Sold separately)
PA -- Will not fit 124" wheelbase or E350 models.
QN -- Requires 80220 ball mount purchased separately.
QP -- Will not fit vehicles with backup sensors built into rear bumper.
QS -- Hitch rated at 2,500 lbs. GTW, 200 lbs. TW.
QT -- Drilling required on vehicles with load leveling compressor or long wheelbase models.
