How To Select The Right Trailer Hitch

Selecting the right trailer hitch for your vehicle can actually be one of the easiest steps in getting ready to tow. If you already know the weight capacities of your vehicle and you know the type of trailer you are planning to tow, then it is only a few simple steps to finding the right hitch.

How to Select the Right Receiver Hitch
Most receiver hitches are designed to be vehicle-specific, making selection fairly easy. One of the best ways to find the right fit for your vehicle is to use CURT's Quick Hitch Lookup tool, located at the top of every page at curtmfg.com. Simply enter the year, make, model and style of your vehicle, and the search results will show all receiver hitches that are compatible, including front mount and rear mount options. It will also show custom wiring harnesses that are able to fit your specific vehicle.

Remember, a hitch is only one component of a towing system. The responsibility for knowing the capabilities of your vehicle and equipment is up to you. Take a moment to watch the "How to Select a Trailer Hitch" video for a general guide to choosing a trailer hitch.



Matching Maximum Weight Carrying Capacity
Weight carrying capacity is one of the biggest factors in determining which trailer hitch to choose. If you are towing with a minivan or sedan, your choices will probably be within the class 1, class 2 or possibly class 3 range. On the other hand, if you have a full-size pickup truck or SUV, you will probably be able to choose from classes 3, 4 or 5.

To help you get an idea of what hitches fit with which tow vehicles, the table below shows the possible relationships between the two. Remember that these are representations only and do not reflect any actual vehicles. Also, not all vehicles within a particular category will be compatible with each hitch class listed.


How to Choose a Ball Mount
After you have selected a receiver hitch, you will also need to select a ball mount. The right ball mount should have a shank size that matches the receiver tube opening of your hitch, a weight rating that meets or exceeds your gross trailer weight and a rise or drop to help level your trailer.

Consider the scenario shown in the diagram below. The height of the receiver tube (A) is greater than the height of the trailer coupler (B). When you tow, you want your trailer to be as level as possible. Because the receiver tube is higher than the trailer coupler, the ball mount is used to make up the difference (C).


Most ball mounts are made with "drop" or "rise" to help level the trailer. When the receiver tube is positioned higher than the coupler, a ball mount with drop will make up the negative difference. When the coupler is positioned higher than the receiver tube, a ball mount with rise will make up the positive difference. The figure above shows a ball mount with drop, indicated by measurement C.

Determining Drop and Rise
To find the measurement of drop or rise for your tow vehicle and trailer, you will need to measure the receiver tube height (A) and the coupler height (B). B minus A equals C, the drop or rise needed. If C is a positive number, your ball mount will need to have rise. If C is negative, your ball mount will need drop.

In general, you will want to select a ball mount that sits slightly higher than the coupler to account for the trailer's tongue weight.

Your trailer dealer can help you choose a ball mount with the correct amount of drop or rise. Many ball mounts are designed to work in either the drop or rise position, allowing you to accommodate various trailer heights.

Also, be aware that you can adjust drop or rise by selecting a trailer ball with a shorter or longer neck.



How to Choose a Trailer Ball
Another component to add to your trailer hitch is a trailer ball. Some ball mounts come with a trailer ball already attached, whether bolted on with a nut or welded on as in a Fusion ball mount.

Most ball mounts will require you to purchase a trailer ball separately and you will need to select one that fits your towing setup. You will need to know the coupler size, the trailer ball hole diameter of your ball mount and the weight of your trailer.



Coupler Size
For the coupler size, most manufacturers stamp or label the correct trailer ball size on the coupler. Use the measurements in the diagram to help select the right size trailer ball for your towing setup. Make sure that your coupler and trailer ball have a solid connection before towing and that all necessary adjustments have been made.

Trailer Ball Hole
The hole in the platform of a ball mount or trailer hitch tongue is where the trailer ball bolts onto. It is important to know the diameter of this hole so that you can choose a trailer ball with a matching shank diameter. If the trailer ball shank is too small, it will shift while towing and tend to come loose. If the shank size is too small for the trailer ball hole, you may be able to use a reducer bushing to make up the difference.

It is also very important to torque the trailer ball nut to the correct foot pounds, based on its shank diameter.

Weight Capacity
As was the case when selecting your trailer hitch and ball mount, weight capacity must be considered when choosing a trailer ball. The weight rating for a trailer ball will be listed as the ball capacity. This will reflect the gross trailer weight limit, not the tongue weight. You must select a trailer ball with a ball capacity that exceeds the gross weight of your trailer.

Adding a Weight Distribution Hitch
If your trailer weighs more than 3,500 lbs., you may want to invest in a weight distribution hitch. A weight distribution hitch is a receiver hitch attachment that levels out your trailer and vehicle by distributing some of the tongue weight across the axles. It may also increase the overall gross trailer weight capacity, based on your specific trailer hitch. Remember, you must always abide by the lowest rated towing component in your towing system.

Weight distribution hitches are compatible with most class 3, class 4 and class 5 receiver hitches. However, some hitches are only rated for weight carrying applications. Verify the compatibility of your own particular hitch before towing.

Installing a weight distribution hitch tends to be fairly in-depth. Be sure to follow all manufacturer's instructions concerning when and how to use a weight distributing system.



Selecting a 5th Wheel or Gooseneck Hitch
For some applications, your choice of trailer hitch may already be decided because of the type of trailer you are planning to tow. Namely, if you have a 5th wheel trailer, you will need a 5th wheel trailer hitch mounted in the back of you pickup truck to haul it. The same is true of gooseneck trailers. A gooseneck trailer must be towed using a gooseneck hitch or a gooseneck hitch adapter attached to 5th wheel base rails.

Keep in mind that even with these specialized hitches, you will still need to consider the weight capacities of your towing system, vehicle and trailer. 5th wheel hitches range from 16,000 lbs. to 25,000 lbs. in capacity, and gooseneck hitches are typically rated to tow up to 30,000 lbs. You will need to know how much your trailer weighs and verify that your truck is rated to tow the heavy load, using your owner's manual.



back to top