With DrawTite's Activator line of Electronic Brake Controls, the amount of braking power (output) and rate of application (sync) are both adjustable for the individual driver's preference, road conditions, type of trailer and load. The driver can control the amount and rate of braking from soft to aggressive and the brakes can be manually applied.
OUTPUT - For ease of adjustment, an output control is located on the front of all Activators's. The Activator has a slide adjustment and its output indicator is a red light, which illuminates when the brakes are applied. The
Activator II &
Activator III have a thumb wheel adjustment and its output indicator is a digital display, which shows the output when the brakes are applied.
SYNC - The sync control is a slide adjustment located on the side of both brake controllers.
Activator II &
Activator III output indicators will digitally display the sync setting.
MANUAL - The manual control is activated by squeezing the trigger located on the front of all Activator brake controllers. Its use will illuminate both the tow vehicle and trailer stop lights as required by National Highway Traffic Safety Administration regulations.
INSTALLATION - Since the Activator line has no moving parts or pendulums to adjust, the can be mounted in virtually any position and require no leveling - ever. Their slim, compact design and contoured shape are combined to provide more under-dash clearance than any other brake controller. A conventional four wire hook-up is illustrated in easy-to-follow instructions. Mounting brackets and hardware are included.
- 100% solid state reliability
- No moving parts
- No hydraulic connections
- Mounts anywhere - no leveling required
Products in the Activator Line of Brake Controllers:
Activator Brake Conrol
Activator II Brake Control
Activator III Brake Control
