Spray on AirAid Cleaning Solution so that the filter is fully saturated, and let soak for 10 minutes.
Rinse filter from the clean side to the dirty side until water comes through clear. Use only low pressure from a tap or hose.
Allow filter to dry. A fan may be used to speed process.
DO NOT use heated air blowers, compressed air, or open flame.
Make one careful application of AirAid® Performance Oil to each filter pleat.
Allow oil to seep into filter for 20 minutes.
Re-oil any areas that still appear dry.
Do not over oil.
Always APPLY LABEL
(Included with the Filter Tune-up Kit)
Affix "Do Not Discard" label to filter case.
PLEASE NOTE:
AIRAID® CLEANING SOLUTION
is uniquely formulated to clean without damaging the gauze filter media.
AIRAID® PERFORMANCE OIL
AirAid Performance Oil forms an additional line of defense against dirt without limiting airflow.
Maintenance Tips
CLEAN:
Clean your AirAid® filter every 30,000 to 50,000 miles for normal driving, and more often for off-road and heavy dust conditions.
CHECK YEARLY:
If your annual mileage is low, check filter once a year to see if oiling is needed.USE ONLY AIRAID
CLEANING SOLUTION:
Use only AirAid® Cleaning Solution to clean your AirAid® filter. Never use gasoline, detergents, steam cleaning or parts solvent.
OIL AFTER CLEANING:
Your AirAid Premium Filter is pre-oiled and ready to use out of the package. Always oil your AirAid Premium Filter after each cleaning. Use only AirAid Filter Performance Oil. No transmission fluid, motor oil, diesel fuel, or light weight oils.
DO NOT OVER OIL!
